For joining pipes, sockets and fittings with interference fit and loose fit (gap filling) in pressure and drainage systems. With special pipe brush for quick and easy application. Suitable for diameters ≤ 250 mm. Max. 25 bar (PN 25) for diameters ≤ 110 mm. Max. 16 bar (PN 16) for diameters > 110 mm and ≤ 250 mm. Maximal tolerances: 0.8 mm diametrical clearance / 0.2 mm press fit. Suitable for pipe systems conforming to EN1566, 15877 and ISO15493 (PVC-C).
Do not use in temperatures ≤ +5°C.
Directions for use
1. Saw off pipes squarely, chamfer and deburr. 2. Clean adhesive surfaces with Griffon Cleaner and Cleaner Cloth. 3. Apply adhesive rapidly and evenly all around (4-6x) to both bonding surfaces (pipe thickly, sleeve thinly). 4. Assemble joint immediately. Remove excess adhesive. For the first 10 minutes, do not load the joint mechanically. Properly close the container immediately after use.
Points of attention
Brush size varies per packaging volume. Use a suitable packaging (brush) for the diameter to be bonded.
Remove adhesive stains with Griffon Cleaner and Cleaner Cloth.