Montagekit Binnen Afwerking

Cartridge 310 g White (Transparent when dry)

Solvent-free assembly adhesive based on acrylate

Montagekit Binnen Afwerking

Description

Properties

  • High final bonding strength
  • Solvent-free
  • Permanently elastic
  • Filling capacity
  • Paintable
Go to top

Applications

Suitable for:

For bonding and assembling many building materials on virtually all substrates, such as polystyrene foam, wood, metal, synthetics, ceramic, stone, plasterwork and (cellular) concrete. Suitable for internal applications, such as timber framework, skirting boards, paneling, laths, doorsteps, window sills, drywalls, sheet and insulation material, decorative edging and decorative materials. Only applicable if at least one of the two surfaces is porous.

Go to top

Handling

Before use:

Working conditions

The ambient temperature, the adhesive and the materials to be bonded should be no less than +5°C.

Preliminary surface treatment

Parts must be clean, dry, free of dust and grease. Surface must be solid.

Tools

Sealant gun and rubber hammer.

During use:

Handling of packaging

Cut off screw thread, assemble nozzle and cut to a diameter of at least 0.5 cm.

Directions for use

Depending on the weight of the material, apply the adhesive evenly in vertical strips or dots at intervals of between 10 and 30 cm. Always apply adhesive to the corners and along the edges. Assemble materials with a pushing movement and press or knock firmly together. Correction is still possible. For heavy materials fasten or support where necessary. Close the cartridge properly immediately after use.

Points of attention

  • Mounting Kit Interior Fnish is white when it comes out of the cartridge. The sealant dries transparent. Depending on the materials and ambient circumstances (e.g. temperature), this may take some time.
  • When bonding pure gypsum materials first do a test bonding. If the surface is very loose, first treat with a penetrating primer or fixation agent.

After use:

Stains/residue

Remove adhesive residues immediately with water. Dry adhesive residue can only be removed mechanically.

Storage conditions

Store dry in sealed packaging between +5°C and +25°C.

Go to top